Power Sequencer

A stable and cost-effective industrial embedded networking terminal timing power controller, which uses 8-bit processor, has rich storage and management capabilities, provides two-way smooth physical transmission channel from 8-way relay control to TCP / IP network, automatically detects 10m / 100M Ethernet, supports Internet, ARP, IP, UDP, TCP, ICMP protocols, optional working mode: TCP server TCP client, UDP server, UDP client, Modbus TCP, MODBUS-RTU, modbus-ascii and other modes support cross gateway, cross route communication control. The TCP server mode supports 4 TCP links. Npsc products have low power consumption, high speed, fast response and high stability. UART communication has a maximum baud rate of 4.6mbps, with TCP client, UDP and TCP server working modes. It is easy to configure the switch mode of 8-way relay through supporting PC software, i.e. setting software.
1.1 functional features
100m high-speed network card, 10 / 100M adaptive Ethernet interface;
It supports auto MDI / mdix, and can be connected with cross network cable or parallel network cable;
UART baud rate can be set from 1200BPS to 4.6mbps;
Working mode: TCP client, UDP, TCP server, UDP server, Modbus TCP, MODBUS-RTU, modbus-ascii;
Support virtual serial port working mode;
It can span gateway, switch and router;
It can work in LAN or Internet;
Work port, target IP address and port can be easily set;
After the network is disconnected, the connection will be automatically disconnected to ensure the reliable establishment of TCP connection of the whole network;
Flexible data frame setting of serial port can meet various subcontracting requirements of users.
1.2 product characteristics
LAN Ethernet: 10 / 100Mbps;
Protection: built in 5kV electromagnetic isolation;
Npsc: RS232 serial port and RJ45 network port;
Serial port rate: baud rate can be set from 110bps to 115200bps;
Network protocol: Ethernet, ARP, IP, UDP, TCP, ICMP;
Tool software: PC working mode configuration software, TCP / UDP test tool, serial port debugging software;
Configuration mode: network, UART;
Power supply: AC 220V;
Control quantity and capacity: 8-way 10A controllable, 1-way direct.
Working temperature: industrial grade: - 25 ~ 75 ° C;
Storage environment: - 45 ~ 85 ° C, 5 ~ 95% RH.